The LRI Action Wrench for Ruger® RPR / AR-15 is designed to aid you in fast, reliable, safe removal/installation of an AR-pattern rifle’s barrel nut. This wrench will eliminate the headaches of sheared-off pins, damaged barrel nuts, failed wrenches, and blood loss from the operator (namely, YOU).
The LRI Action Wrench for Ruger® RPR / AR-15 provides secure, non-slip 360-degree contact with the barrel nut - no way this wrench will slip off! A pinch bolt gently cinches the LRI Action Wrench to the barrel nut, eliminating offset loads that lead to slippage and damage to the barrel or its finish.
The LRI Action Wrench for Ruger® RPR / AR-15 is machined from billet steel - NOT A CASTING, so no risk of a hidden flaw or void in the metal leading to wrench breakage. This is one beast of a barrel nut wrench!
Brownells Gun Tech™ Tip: The LRI Action Wrench requires a little math to use. Torque wrenches are calibrated to the centerline of the square drive. The LRI tool is offset, so its torque values have to be recalculated to ensure the desired amount is actually applied to the fastener. There are a number of Internet tools to help you do this, including this one: http://www.cncexpo.com/TorqueAdapter.aspx
High-impact plastic tools drive out the front and rear takedown pins or help get the magazine catch out from your M16/AR-15 without scratching or marring the metal. Pushtool for the takedown pins comes in two versions: a bench model or a handy key ring model. Magcatch tool compresses the spring to make removal of the magazine catch easier.
SPECS: High-impact plastic, black. Takdown Pin Tool also available in green.
Skeletonized aluminum jig lets you observe the function of the sear, hammer, and disconnector engagement points while under normal spring tension. Jig interior is machined to the exact dimensions of the AR-15 fire control pocket. Open sides of jig offer plenty of room to make adjusts to the trigger assembly without having to take it in and out of the rifle. Jig can be mounted in a vise or on a pistol grip. Plastic block permits dry firing the assembly and won’t damage the hammer or jig.
SPECS: Aluminum, matte black. 4-½" (11.4cm) OAL, 1" (2.5cm) wide, 1-¼" (3.2cm) high. Includes plastic hammer block, pistol grip mounting block, and screws.