Buy at this store.See Detail Online And Read Customers Reviews Steel Neck Sizing Bushings Rcbs prices throughout the online source See individuals who buy "Steel Neck Sizing Bushings Rcbs" Make sure the shop keep your private information private before buying Steel Neck Sizing Bushings Rcbs Make sure you can proceed credit card online to buySteel Neck Sizing Bushings Rcbs together with store protects your information from fraudulents Make sure the customer support is always there to help you when you place Steel Neck Sizing Bushings Rcbs order with them
RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy.
RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies.
Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
Sinclair Carbide Neck Sizing Bushings are very popular among benchrest shooters because they are smoother, harder, and available in ½ thousandths increments. These bushings have a small radius on the down side only, and should not be used upside down. These carbide bushings will fit L.E. Wilson and Redding dies. Currently only available in popular 6mm sizings.